Ferramentas Manuais

This set includes two jaw sets, a grease retainer adaptor, bearing hook, body dent puller, stud-pulling head, and a 2 lb slide hammer. Designed for extracting bushings, seals, sleeves, bearings, and pressed-in studs with a maximum reach of 2.5 inches.

This set of conical pliers features high-quality construction, precision tips, and durable materials, ideal for detailed work and professional applications in various industrial and automotive tasks.

High-quality puller extractors with reversible jaws, spring-loaded locking mechanism, and durable construction. Suitable for inside and outside applications, offering quick setup and reliable performance.

Includes multiple jaw configurations, interchangeable components, and a robust design for efficient pulling operations. Features spring-loaded locking, reversible jaws, and heat-treated forged parts for durability and safety.

Versatile pullers designed for use on Pitman arms, timing gears, carrier side bearings, and more. Capable of creating up to 10 different pullers by combining components. Capacity ranges from 6 to 10 tons depending on yoke and jaws used.

Universal extractor tools designed for steering wheels, flywheels, pulleys, and gears with tapped holes. Includes a four-position yoke, various pressure screw tips, and a collection of SAE and metric bolts in a storage case. Approximate bolt spread is 1-1/4 to 3-13/16 inches.

High-quality snap-on socket designed for durability and precision. Suitable for various automotive and mechanical applications, ensuring secure fit and easy handling.

20" adjustable joint pliers with nickel-chrome finish, overall length of 20 inches, maximum jaw opening of 11 inches, and parallel opening of 5-1/2 inches. Made in the USA, these blue-point pliers are designed for versatile gripping tasks.

Set of four adjustable pliers, suitable for a wide range of applications. Forged construction offers approximately 58% greater strength than stamped pliers. Features wide cushioned grips, a special tongue-and-groove design for slip-resistant jaws, and a unique fastener system to prevent side-to-side wobble.

A versatile set of combination wrenches featuring flat and Torx heads, suitable for various mechanical and maintenance tasks. Made with durable materials for long-lasting performance.

Set of 12 wrenches (8-19 mm) with 90° flexible head, reversible double ratchet with up to 80 teeth for easy access to hard-to-reach fasteners, low-profile reversal lever, and durable nickel-chrome finish, all organized in a practical tray.

Set of 6 wrenches in different sizes, patented Spherical Drive wrench that fits 6 types of fasteners, heat treatment for high durability, nickel-chrome finish for corrosion protection, 72-tooth ratchet for high torque, and a practical storage tray.

Set includes ten miniature pliers and cutters stored in a tray. Features soft grip handles for comfort and control, with drop forged chrome/nickel alloy for corrosion resistance. 

Set includes nine pieces ranging from 4mm to 18mm, with a storage tray. Made of chrome finish material, suitable for various mechanical tasks requiring precise torque application.

A comprehensive set of 43 pieces including various Torx sockets and bits for different drive sizes, all stored in a durable case. Suitable for professional and DIY use, ensuring versatility and reliability in fastening tasks.

Includes ten 1/4" drive TORX® bit sockets (T10-T50) in a storage tray. Stubby, one-piece quality socket, satin chrome-plated with bold markings for easy identification. All sockets are 3/4" long with 1/4" square drive. Features reduced fastener depth penetration for increased strength.

Set includes 1/4", 3/8", and 1/2" drive components with various external and internal TORX® sockets, metric and imperial hex bits, and long bits, all stored in a case. Suitable for professional and industrial use.

Complete set with SAE and metric wrenches, adapter, extension and ratchet, all stored in a sturdy case. Ideal for professional and DIY applications requiring versatile fastening tools.

This L-shaped wrench features a pivot head for maneuverability around obstacles, engineered joints for durability, long handles for extended reach, and is made from heat-treated industrial steel. 

A versatile double crescent wrench set suitable for various applications, covering sizes from 8 to 19 mm and 21 to 24 mm. Ideal for professional and DIY use, offering durability and precision.

Includes a complete set of socket wrenches and jigs suitable for various tightening tasks, compact storage box, ideal for home and professional use, with a full range of deep and shallow socket wrenches for the most common fasteners.

A comprehensive set of 25 wrenches with a 1/2? drive, suitable for various mechanical and maintenance tasks, offering durability and precision.

Adjustable combination wrench suitable for various fasteners, with a mouth size range from 7mm to 32mm. Made of durable material for professional use, featuring a comfortable grip and precise jaw opening.

A comprehensive socket wrench set featuring a hook and lunette, with sizes ranging from 8mm to 19mm. Designed for versatile applications, offering durability and precision for professional and DIY use.

Compact mini ratchet wrench with integrated 1/4" box and hexagon bit driver, with head offset by 10° for greater joint space, compatible with all 1/4" hexagon bits, push-button release, low-profile reverse lever and durable nickel-chrome finish. Specifications: TWN.

Set includes ten short metric socket wrenches (4-13 mm), thirteen assorted insert bits, a 4" extension and a 6" bit ratchet. Ideal for in the car or at home, with multifunctional ratchet, push-button socket wrench release, low-profile reverse lever and compact case.

Heavy-duty impact wrench with a 10-19 mm capacity, designed for professional use. Features durable construction, ergonomic handle, and high torque output for demanding applications.

Set includes 13 pieces ranging from 8 to 19 mm and a locking extension, designed for versatile use in various mechanical tasks.

This compact cutting hammer features a head length of 2-3/16 inches, handle length of 12 inches, and a head weight of 6-1/2 ounces. Designed for precision and accessibility in tight spaces, with a minimized head and a biased tip for better reach.

This chipping hammer features a 1-3/4 inch head height for full swings in hard-to-reach areas, with a head weight of 7 ounces and a handle length of 12 inches. Made in the USA, it offers durability and precision for professional use.

High-quality chipping hammer with a 1-5/8 inch square face, 16 oz head weight, and 13-inch handle length. Designed for precision and durability in metalworking and demolition tasks.